RUKI chandelier, 15x20cm, 1xG9, Glass and Resin, Gold

LED chandeliers have an integrated light source and offer high energy efficiency. Bulb chandeliers allow you to choose the type of bulb, depending on your preferences.

Simple models, yes. For dimming or advanced functions, you need dedicated switches or remote controls.

Periodic dust cleaning. LEDs have a long life and do not require frequent changes.

For the living room, the diameter can be approximately 1/3 of the width of the table or related to the volume. In small rooms, choose more compact diameters.

The applique sits close to the ceiling and is suitable for low ceilings. Suspended has cables or rods and fits spaces with good height.

IP20: No moisture protection. It is used in dry rooms (living room, bedroom, hall).

IP44: Protected against splashing water from any direction. Necessary for general lighting in the bathroom.

IP65: Completely protected against water jets. Mandatory for spots mounted directly in the shower cabin or above the bathtub.

Very important! CRI (Color Rendering Index) indicates how naturally a light source renders the colors of objects. A CRI of 80 is considered good for general lighting. For areas where color accuracy is essential (kitchen, dressing room, bathroom, above a work of art), choose a CRI of 90+.

It's very simple! Everything is quickly adjusted from the included remote control settings. 📱 Plus, you'll find detailed instructions in the package so you can customize the light just the way you want it! ✨

⚠️ ATTENTION!: Setting to a certain color temperature can only be done if the chandeliers are turned off and on from the remote control. In both chandeliers with and without a remote control, successive presses of the switch change the type of light.

🔎 Check the **specification page** of the product for the parameter Switch type:

• ✅ If mentioned Classic, Remote Control, the chandelier includes a remote control.
• ❌ If "Remote control" is **not** mentioned, the product does not have one and cannot be ordered separately, as it is not compatible with this type of control.

🔧 To sync the chandelier with the remote, follow these steps:

• 📌 **If the remote has a SET UP button** (with a Wi-Fi symbol in the middle), turn off the lamp at the switch, then when you turn it back on, press and hold the SET UP button for a few seconds.
• 📌 **If the remote control does not have a SET UP button**, the product is equipped with a wire (infrared sensor). Pull this wire outside and bring the remote control closer to the product to pick up the signal.

⚠ If sync is not working, please contact us for assistance.